速報APP / 房屋與房產 / ShellySwitch - Voice controlled

ShellySwitch - Voice controlled

價格:免費

更新日期:2019-01-18

檔案大小:15M

目前版本:1.4

版本需求:Android 5.0 以上版本

官方網站:http://www.shellyswitch.pw

Email:info@claco.pw

聯絡地址:隱私權政策

ShellySwitch - Voice controlled(圖1)-速報App

There are 4 navigation tabs (at the bottom of the screen)

[HOME]

This is the main page, where you will see a button for each shelly device you configured.

This is a toggle button which allows you to switch on/off your light.

[ROOMS]

Here you can switch on/off your devices based in which room they are.

(i.e. switching of all light in the kitchen at once.)

[DEVICES]

This is the place where your devices are listed and where you can search for new devices.

(local shelly ip) = the ip address of your shelly device on the local network

(remote shelly ip) = if you configure port forwarding from outside to your shelly device, you can enter the remote address here. This allows you to control your device from outside the network.

(shelly name) = name for your shelly device (ie. lamp 1). You can then later on use the voice command "light lamp 1 on".

(shelly room) = the room where the shelly device is (ie. kitchen). You can have multiple shelly device in the same room. You can then later on use the voice command "lights kitchen on".(shelly username) = if you configured your shelly with credentials, add them here, if not leave blank.

(shelly password) = if you configured your shelly with credentials, add them here, if not leave blank.

[SETTINGS]

This is where you can change some global settings (more to come later)

Enable voice commands = if you want to control through voice control set to "on".

Voice trigger mode = "Shake". The phone will start listening after you shaked it. (More triggers to come in the future)

ShellySwitch - Voice controlled(圖2)-速報App

Language = "English" or "French". Depening on your phone, possibly more coming in the future.

[VOICE COMMANDS]

Make sure you enabled voice commands in the settings tab.

Shake your phone and you should here "I'm listening"... Right after that speak out your command...

Default voice commands:

--Lights on (This will turn on the light of all configured devices)

--Turn on lights (This will turn on the light of all configured devices)

--Lights off (This will turn off the light of all configured devices)

--Turn off lights (This will turn off the light of all configured devices)

--What time is it (This will give you current time)

--What day is it (This will give you today's day)

--help (This will list all possible default voice commands)

- ....

Voice commands based on your configured devices (rooms and shelly names)

--Turn on [kitchen] (This will turn on all lights in the kitchen)

--Turn off [kitchen] (This will turn off all lights in the kitchen)

--Turn on [lamp 1] (This will turn on light with name "lamp 1")

--Turn off [lamp 1] (This will turn off light with name "lamp 1")

ShellySwitch - Voice controlled(圖3)-速報App

- ...